3 seater sofa with left-hand chaise longue, with reclining headrests and sliding seats.
Upholstered with textured fabric. Seat and back cushions come with removable covers for dry-cleaning or machine-washing up to 40°.
Kave Cares Design: recycled PET fibre filling, with a zero-emissions internal frame.
Local production. Made in Europe using traditional techniques, reducing CO2 emissions for a lower environmental impact.
Wood with FSC Mix Credit certification, made from a mix of materials from FSC certified forests and FSC controlled wood.
Singa takes you to a whole new level of relaxation thanks to its reclining headrests and sliding seats. It’s a Kave Home design down to the last details, made in Europe from sustainable and recycled materials. A sofa with a capital S.
25% Pine wood (Pinus pinaster), 20% Foam PU (Polyurethane), 10% Fabric, 10% Particle board, 10% Recycled fibers, 8% Medium Density Fibers MDF with low formaldehyde emissions E0, 5% Acrylic fibers, 5% Beech wood (Fagus Sylvatica), 5% Steel, 2% Raffia
Main finishing
Upholstered
Fabric type specifications
Plain fabric
Fabric composition
100% Polyester
Fabric grammage
420 g/m²
Fabric durability resistance (Martindale cycles)
>90.000
Pilling resistance
4 - Very good
Color fastness to light
5 - Very good
Frame construction
Beech wood (Fagus Sylvatica), Medium Density Fibers MDF with low formaldehyde emissions E0, Particle board E0, Raffia, Pine wood (Pinus pinaster), Acrylic fibers, Webbing, Upholstered, Steel
Seat material details
Fabric, Foam PU (Polyurethane), Acrylic fibers
Seat fill material
Foam, Acrylic fibers
Seat foam density
30 kg/m³
Backrest material details
Foam PU (Polyurethane), Medium Density Fibers MDF with low formaldehyde emissions E0, Particle board E0, Raffia, Fabric, Upholstered, Pine wood (Pinus pinaster), Acrylic fibers
Backrest fill material
Recycled fibers
Backrest foam density
20 kg/m³
Legs material
Beech wood (Fagus Sylvatica)
Legs finishing
Lacquered
Feet pad type
Felt pad
Armrest material details
Fabric, Medium Density Fibers MDF with low formaldehyde emissions E0, Particle board E0, Pine wood (Pinus pinaster), Foam PU (Polyurethane)
Armrest density foam
25 kg/m³
Headrest material details
Fabric, Foam PU (Polyurethane), Acrylic fibers, Stainless steel
Headrest density foam
20 kg/m³
Percentage of recycled materials
< 25
Percentage of natural materials
< 25
Swatch cards code MTK
MTK0236
Unpacking suggestions
Be careful opening with a knife. Keep the packaging some days for in case of return and keep assembly instructions for possible future consult.
Assembly required (yes/no)
Yes
Difficulty of assembly
Easy
Assembly time
25 min
People required
4
Assembly suggestions
Check and classify all fittings before starting the assembly. Assemble on a soft surface.
General warnings
Do not place near direct sources of heat. Keep away from direct solar light. Do not use abrasive products like acetones, bleaches, solvents, etc. Sharp elements can scratch the product surface.
Specific use and care instructions
Cold washing (below 30ºC). Do not bleach. Can be ironed at medium temperature. Dry clean but not with products containing tetrachlorethylene.
Made according to
EN 125202015 for household use seats
FLEGT license (yes/no)
N/A
GOTS certificate
N/A
Variation type
Light and environment conditions may distort the color perception of the product.